H6 Control Units and 24V DC
COMBIVERT H6 – Integrated Control Technology and 24VDC – Power Supply
Decentralized automation with a freely programmable IEC 61131 control and
24V DC supply with optimum integration in the H6 system.
Solutions for drive-type tasks or as protocol converter.
If the 24V DC system is coupled via the DC intermediate circuit with the axis system, the power available in the system can be used in the event of power failure.
Control module and module are 24V DC supply:
- H6 24V DC module
- H6 Control module, 24V DC
- H6 24V DC module with terminals for supply to external components
- 24V DC - module for supply to H6 system via 24V DC bus
- 24V DC connection cable for supply to H6 system from an external source
- 24V DC module for supply to H6 system via 24V DC bus and terminals for supply to external components
- No connection of 24V DC module to DC intermediate circuit of the H6 system, for de-coupling with B6 supply
- Connection of 24V DC module to DC intermediate circuit of the H6 system with AFE operation
- Connection of 24V DC module to DC intermediate circuit of the H6 system, to utilize generator-supplied power to 24V DC buffering in the event of power failure
- Without fieldbus – slave connection card
- Profibus Slave
- Interbus Slave
- CAN Slave
- ProfiNET Slave
- Powerlink Slave
- EtherCAT Slave
- Basic functions => No licence required
- Softmotion licence
- Softmotion / CNC licence
Properties
- Module width 50mm
- Short-circuit-proof 24V DC power supply with 25A rated current
- Option of use of several H6 24V DC modules in one system
- 24V DC module variants with terminals for external 5A (switchable) and 7A supply
- Optional 24V DC connection cable (length 2m) for supply to H6 system from an external source or for connection of two H6 systems
- Different licensing levels available
- CoE Protocol
- EtherCAT Master
- Optional range of fieldbus – slave connection cards
- Parameter setting available in COMBIVIS Studio 6 in accordance with IEC 61131
- Optimum combination possible with C6 Safety PLC
- Optimum combination possible with C6 Remote I/Os and Safety I/Os
Contact for Multi-axis drives
KEB Automation KG |
+49 (0) 5263 401-0 |